След Капитален 2010 - Универсална Подбивна ж.п. машина Plasser 09-32/4S {Производство: 1999 година, Капитален ремонт: 2010 година} за Продажба
Визуална инспекция на подбивната машина (условия) от:
= Брокер мрежа TAMPER.EU (активен membership, различен от Гост): NCND договор и депозит 1500€
= Брокер извън мрежа TAMPER.EU (без регистрация): NCND договор и депозит 3000€
= Краен купувач, за контакт email: sales@tampers.org или контакт с Head Office - NCND договор и депозит 1000€
ЦЕНА: По запитване или Моля, авторизирайте се, за да видите цената
Visual Inspection of Tamper (terms):
= Broker network TAMPER.EU (active membership, different by Guest): NCND agreement and deposit 1500€
= Broker outside network TAMPER.EU (unregistered): NCND agreement and deposit 3000€
= End buyers, for contact email: sales@tampers.org or contact Head Office - NCND agreement and deposit 500€
PRICE: Upon Request or Please log in to see the price
Sales information
| Тechnical condition Latest inspection (revision) 20.01.2010 - 2016 |
| Computer controlled: |
Works, Automatic ALC Plasser |
| Tamping units: |
Works, Good mechanical condition |
| Axles and transmission: |
Works, Good mechanical condition |
| Engine: |
Works, Good mechanical condition |
=======================================================================
Product information
Producer
- Brand
-
- Universal tamping machine for track and switches
- Continuous travel, cyclic tamping during maintenance of plain track and far into the areas of switches
- Treatment of switches using three rail lifting and four rail tamping
- Four independent tamping units with a total of 32 tamping tines
- The outer tamping units on each side are positioned on telescopic jibs and can be driven out for tamping the fourth rail
- Lifting and lining unit with lifting hooks and roller clamps
- Automatic supplementary lifting device for lifting the third rail
- Cabin at the front with driver's desk and ALC automatic guiding computer
- Cabin over the lifting and lining unit when working in switches
- Cabin in the middle with workplace for the track maintenance operations
- Cabin at the rear with driver's desk
- Sweeper unit for track and switches with reversible transverse conveyor belt
-
Drawing
- Model
- 09-32/4S
- Year model
- 1999
- Chassisnumber
- is available on request
Vehicle information
- Registration number
- is available on request
- Weight (kg)
- 126000
- Latest inspection (revision)
- 2010 (valid revision to 2016)
- REM inspection ( are granted upon request, contact our regional office or agent)
- 1.07.2017
- Transmission
- Unknown
Engine/Fuel
- Engine volume
- is available on request
- Engine output
- is available on request
- Fuel type
- Diesel
- Number of fuel tanks
- 01
Load details
- Load dimensions (l/w/h)
- L = 28900 / W = 2970 / H = 4090 mm
- Payload (kg)
- N/A
Truck details
- Cabin
- Unknown
- Axle type
- Unknown
- Hydraulics
- N/A
- Pull-hook
- N/A
- Accessories
- N/A
- Euro class
- N/A
Suspension
- Front shaft
- N/A
- Drive shaft
- N/A
- Bogie
- N/A
Tractor
- Disc
- N/A
- Locking
- N/A
Other information
-
- GB: Tamping machine
D: Universal tamping machine for track and switches
Last inspection 1.07.2017, last service 10.12.2016.
REM inspection 1.07.2017 (are granted upon request, contact our regional office or agent)
- *****
| Specification |
| Length over buffers: |
mm |
| Broad Gauge Track: |
1435 mm |
| Height over top of rail: |
mm |
| Width: |
2,970 mm |
| Wheel diameter: |
710 mm |
| Wheelbase: |
|
| Width: |
|
| - Bogie pivot spacing: |
|
| - Bogie pivot – rear axle: |
|
| - Bogie wheelbase: |
|
| Weight: |
126 t |
| Axle loads of front bogie: |
|
| Axle load sub-frame: |
|
| Axle loads of rear bogie: |
|
| Axle load of rear axle: |
|
| Engine output: |
475 hp |
| Maximum traveling speed: |
1200 metres/hour |
| - Self-propelled: |
100 km/h |
| - Towed: |
120km/h |
REM options:
-
-
MAINTENANCE RAIL CAR 701 - 1962 FOR SALE SALE
SKU: SKU18195
-
