The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu.
Ships hull is made of unique aluminium A– magnesium combination AMG A– 1615T which makes the ship all most unsinkable
Displacement (tons):
Standard:
61
Full load:
99,7
Dimensions (m):
Length:
25,65
Beam:
5,66
Draft:
1,52
Speed (kts):
30
Range:
600 nm (12 kts), 100 nm (30 kts)
Autonomy (days):
1
Propulsion:
2x3300 hp diesels M-503A-3 (№807, 808 – 2x2000 hp diesels MTU16V2000M90), 2 diesel generators DG-16/1500 x16 kW
Armament:
-
Electronics:
Navigation radar "Pal-N-3"
Capacity:
1 main battle tank or 2 BTR or 92 troops or 50 tons of cargo
Crew:
5 (2 warrant officers)
Schematics
Air-Cavity Landing Craft - Project 11770
Modernizations
---
The fast landing craft Project 11770 main task is to quickly get to the shore, to land troopers and just as quickly go away to a safe distance, for example, for a new "load" in the form of armored vehicles and soldiers. High-speed air cavity patrol boat "Serna" is designed for transportation and debarkation on an unequipped shore of wheel and caterpillar technical equipment, crew with arms (92 persons) and other cargos of total load up to 45 tons. The boat can be refloated on it’s own. The boat can transport cargos and equipment with a speed of 30 knots with a sea state up to 2. When the sea state is up to 3, cargo transportation is possible with a speed of 27 knots. Safe navigation is possible with total displacement when sea state is up to 5. The speed in this case will not exceed 8 knots. The boat can transport people and cargos to the sea shore settlements up to 600 miles with full displacement with cargo and sea state up to 3. In this case the cargo weight must not be more than 29 tons. The boat is equipped with two diesel engines ?503?, capacity 4000 hp (2940 kW) each, when the fuel consumption is 165 g/hp h. Endurance of the boat by Provisions and water stock endurance is 24 hours. Service life of the boat is 15 years provided there are two intermediary repairs every 5 years. By 2013 eight Project 11770 Serna boats were built. Developed in Nizhny Novgorod by SPK Alekseeva, the boats are smaller than the French L-CAT used on Mistral. Their length is just under 26 meters and about six meters wide. The dimensions of the landing deck allows the Sernam» carry about 40-42 tons main battle tank, two armored personnel carriers or two armored personnel carriers. Also it is possible to transport personnel only - up to 92 troops with weapons. The Project 11770 boats can accelerate to 30 knots and cover distances up to 600 miles. This high performance is achieved by using the original engine and chassis configuration. Two M503A diesel engines develop power 4000 horsepower and torque on a ventilated water-jet propeller. From the usual pump shoe it is different because the pipe with the screw enters the air trapped under the bottom of the boat. The fact of the matter is that to improve the running characteristics, the project Serna provides speed using the air cavity under the bottom of the boat. As a result of the air layer between the water and the boats reduced resistance and Serna can reach higher speeds.
This Ship is Deep of the In the Sea? Only On The Sea water?
Admin:
********* Your request can not be processed *************
Dear Sir,
REM Sales Department processed inquiries only sent by registered customers
already in www.tampers.org platform or client with a clear status: company,
city, state, phone, website, etc.!
At the moment you are not registered client / individual or company client
/ you must:
[1] to fill out information about your status, see paragraph [1A] or
[2] to register as a client company from corporate e-mail, see paragraph
[2A].
-----------------------------------------------------------------------------------
[1A] PROFESSIONALS CHECK LIST ! We need the following in order to work
with you:
Your status:
1) Your request is on behalf of natural person: Yes / No or Your request
is on behalf of company: Yes / No
- Company name: .......
- City: ........
- State: ............
- Phone: ...........
- web: .........
2) SKU code of the product you are interested or web page:.........
[2A] REGISTER AS A CLIENT COMPANY FROM CORPORATE E-MAIL:
{{ We inform you that your status is currently *UNREGISTERED*, you\'re not
complete the procedures for registration of company / legal entity /}.
To use service and see prices in www.tampers.org, you must be a registered
customer of the platform www.tampers.org as a company / legal entity /.
Not a tampers.org user yet? Register now free-of-charge and without
obligation:
1) Load in your browser: www.tampers.org ;
2) for Registration - press \"Register\" in \"My Account\" top right;
3) Enter the corporate email for the registration company / legal entity /.
4) After verifying your registration by REM Admin, you will receive a
notification letter or you will receive an activation link that you need
to activate.
= Inquiries with registrations of anonymous enamels (free Gmail servers,
etc.) are automatically blocked. Requires you implement a procedure
paragraph [2] or [3].
You receive: Notification letter Option 02 \"Your registration is
*CANCELED* or *DENIED*\"
= Inquiries with registrations of corporate enamels (active corporate
website and active corporate e-mail) you will receive an activation link
after verification of REM Admin, within 24 hours.
After activation link /in you corporate email/ you receive: Notification
letter Option 01 \"Company {Name} Accounts in www.tampers.org platform is
active.\"
[1] You need to do a new registration of active corporate email name company;
or
[2] Must provide us with evidence that you are an employee of a company
{Name}, information must be submitted on official letterhead company sent
to e-mail:sales@tampers.org or fax: +359-52-319990.
or
[3] You need to send a request for bidding of a product platform of
official letterhead of the company send to e-mail:sales@tampers.org or fax:
+359-52-319990.
Regards,
REM Sales Department
REMTECHSTROY GROUP (REMTECH™)
TAMPERS.EU (REM™ Store online marketplace)
VARNA 9000 - BULGARIA, REMTECHNOSTROY ® Group (Head office Varna)
Address: Varna 9010, Industrial zone, 1 Studenstska Street, et.1
Customer Centre Head office Varna:
Tel (switchboard): +359 52 319980 (Speaking: English)
Tel: +359-52-319980 ext.105 or 106 (Perfectly speaking: Bulgarian, Russian)
Fax: +359-52-319990
email: web@remtechnology.eu
email: sales@tampers.org
REM™ Store online marketplace {http://www.tampers.org}
REMTECHSTROY GROUP {http://www.remtechstroy.org}
REM™ Startup Project {http://startups.tampers.org}
BUSINESS PROJECTS looking for
partners and investors {http://InvestorSearch.tampers.org}
New REMTECH™ railway mechanization {http://www.remtech.info}
Rebuilt Machines Plasser for Sale {http://www.tampers.org/rebuilt.html}
Used Machines Plasser for Sale {http://www.tampers.org/used.html}
Presently our China Railway Group is intending to purchase ballast regulator(1),tampers(2),track stablizer(1) for carrying out a project in Malaysia. If your company can give us a CIF price and time of delivery on any machine I mentioned above,we...
Only On The Sea water?
********* Your request can not be processed ************* Dear Sir, REM Sales Department processed inquiries only sent by registered customers already in www.tampers.org platform or client with a clear status: company, city, state, phone, website, etc.! At the moment you are not registered client / individual or company client / you must: [1] to fill out information about your status, see paragraph [1A] or [2] to register as a client company from corporate e-mail, see paragraph [2A]. ----------------------------------------------------------------------------------- [1A] PROFESSIONALS CHECK LIST ! We need the following in order to work with you: Your status: 1) Your request is on behalf of natural person: Yes / No or Your request is on behalf of company: Yes / No - Company name: ....... - City: ........ - State: ............ - Phone: ........... - web: ......... 2) SKU code of the product you are interested or web page:......... [2A] REGISTER AS A CLIENT COMPANY FROM CORPORATE E-MAIL: {{ We inform you that your status is currently *UNREGISTERED*, you\'re not complete the procedures for registration of company / legal entity /}. To use service and see prices in www.tampers.org, you must be a registered customer of the platform www.tampers.org as a company / legal entity /. Not a tampers.org user yet? Register now free-of-charge and without obligation: 1) Load in your browser: www.tampers.org ; 2) for Registration - press \"Register\" in \"My Account\" top right; 3) Enter the corporate email for the registration company / legal entity /. 4) After verifying your registration by REM Admin, you will receive a notification letter or you will receive an activation link that you need to activate. = Inquiries with registrations of anonymous enamels (free Gmail servers, etc.) are automatically blocked. Requires you implement a procedure paragraph [2] or [3]. You receive: Notification letter Option 02 \"Your registration is *CANCELED* or *DENIED*\" = Inquiries with registrations of corporate enamels (active corporate website and active corporate e-mail) you will receive an activation link after verification of REM Admin, within 24 hours. After activation link /in you corporate email/ you receive: Notification letter Option 01 \"Company {Name} Accounts in www.tampers.org platform is active.\" [1] You need to do a new registration of active corporate email name company; or [2] Must provide us with evidence that you are an employee of a company {Name}, information must be submitted on official letterhead company sent to e-mail:sales@tampers.org or fax: +359-52-319990. or [3] You need to send a request for bidding of a product platform of official letterhead of the company send to e-mail:sales@tampers.org or fax: +359-52-319990. Regards, REM Sales Department REMTECHSTROY GROUP (REMTECH™) TAMPERS.EU (REM™ Store online marketplace) VARNA 9000 - BULGARIA, REMTECHNOSTROY ® Group (Head office Varna) Address: Varna 9010, Industrial zone, 1 Studenstska Street, et.1 Customer Centre Head office Varna: Tel (switchboard): +359 52 319980 (Speaking: English) Tel: +359-52-319980 ext.105 or 106 (Perfectly speaking: Bulgarian, Russian) Fax: +359-52-319990 email: web@remtechnology.eu email: sales@tampers.org REM™ Store online marketplace {http://www.tampers.org} REMTECHSTROY GROUP {http://www.remtechstroy.org} REM™ Startup Project {http://startups.tampers.org} BUSINESS PROJECTS looking for partners and investors {http://InvestorSearch.tampers.org} New REMTECH™ railway mechanization {http://www.remtech.info} Rebuilt Machines Plasser for Sale {http://www.tampers.org/rebuilt.html} Used Machines Plasser for Sale {http://www.tampers.org/used.html}